ACT-700H, has RF but no AF
If customer has an issue where the handheld mic send wireless, radio, frequencies to the receiver, AF meter shows activity, but does not show audio, AF, activity, please open the windscreen, Black, then open the second windscreen, Silver. There is a small set of cables that connect the capsule to the mic with a connector on each side. Make sure they are both connected. One to the capsule and one to the mic itself.
Related Articles
ACT-700 Choose frequency on receiver
go to highest group number, then edit mode, (hold mode/paramter button till an icon is flashing) go to channel, when Channel icon is flashing, LONG press the mode/Parameter button. this will allow you to chose your frequency.
TA4 Pinout/ and MU-40GX pin out for MiPro body pack.
MiPro Power supplies
MODEL NUMBER POWER SUPPLY PART # Housing Amperage Voltage ACT-2401 2DB010 Wall Wart 1A 12V ACT-2402 2DB010 Wall Wart 1A 12V ACT-2412 1SPS0036 Brick, w/IEC 2A 12V ACT-2414 1SPS0036 Brick, w/IEC 2A 12V MP-80 2DB011 Wall Wart 1A 12V MT-24A 1SPS0036 ...
UPDATING FRENETIK DANTE POE+ SPEAKER WITH Adjust4
See attached PDF
SPK 3 trbleshooting
Frenetik SPK3 Troubleshooting The Frenetik SPK3 is a PoE+ Dante audio appliance. The SPK3 is powered by PoE+ and can receive and decode audio sent in the Dante protocol. It utilizes an onboard amplifier and loudspeaker transducers to generate ...